Autek Ikey820 Auto Key Programmer Universal Ikey 820 Key Programmer Update Online With Free Tokens
OBD2Store.com How To Do Autek Ikey820 Auto Key Programmer Autek Ikey 820 Key Programmer Update:
Take the following steps to update AUTEK IKEY 820 device:
1) Connect device to PC through USB cable;
2) Open AUTEK IKEY 820 Update Tool in your PC that needs to be on
internet;
3) Select the device in list and input the SN (usually completed
automatically);
4) Click UPDATE button to start updating, wait until the updating
completed.
There is something you need to notice in each step.
1) The device should display “USB SD DISK MODE” when connected to
PC through USB cable, if not, please unplug the USB cable and plug
again. Do not unplug the USB cable or exit from USB SD DISK MODE.
2) If AUTEK IKEY 820 Update Tool is not installed, please install it first,
see detail in chapter 2.
3) The DISK and SN should display automatically if the device is
connected to PC. If the DISK has no device to select, please unplug
the USB cable and plug again. If the DISK has been selected, but SN
is empty, please unplug the USB cable and plug again. If it‟s still the
same, please input SN yourself. The SN should start with “A-”.
4) It may take several minutes to update, it depends on the speed of your
internet.
If there is any problem, it will display on message area, check
according to the message and try again.
OBD2Store.com-- China OBD2 Tool, Automotive Diagnostic Tools, Car Key Programmer, OBD2 ECU chip tuning tool Center.
Contact information:
Website: www.obd2store.com
Email: chinaobd2store@gmail.com
Skype: sales-obd2store@outlook.com
Whatapp: +86-13682550935
没有评论:
发表评论